APPLICATION GUIDE · SPAIN

Why do hands return to the danger zone when positioning a load?

Because the hand is performing a real function: guiding, aligning, steadying or stopping movement. Reducing exposure starts with understanding that function.

START WITH THE TASKGuiding · holding · aligning · steadying · retrieving
APPLICATION REVIEW

Why do hands return to the danger zone when positioning a load?

01

Look at the complete task

Do not watch only the lift. Include preparation, tensioning, travel, approach, placement, release and sling or accessory retrieval.

02

Identify what the hand does

Does it guide a part, stop rotation, align a component or hold a sling? The answer points to the interface that might be assessed.

03

Watch the closing moment

As the load approaches, clearances shrink and workers may be tempted to use a hand for the final adjustment. Review geometry, residual movement, available control and a safe working position.

04

Consider alternatives and validate

A push/pull tool, tagline or other interface may help in a specific application. It does not replace lift planning or authorise approaching a suspended load. Select and trial solutions against the procedure, load and environment.

05

Start with a task conversation

PSC can review an application description or images and help define what information is needed before choosing a tool.

Potential application only. Suitability must be checked against the task, site conditions and customer procedures.

Share a load-positioning task

Request an application review